Glass Bottle Blow Molding

MORE DETAIL

This sketch shows a QKL Electronic proportional pressure regulator ( I/P converter) piloting a volume booster in a glass bottle blow molding application. Most glass bottles are manufactured via the "press & blow" method. In this method the pressure regulator is used at the final stage to fill air into the molten glass in a mold. 

Our proportional pressure regulator is best suited for this application due to its high flow rate, fast response time, and high accuracy. Our regulators are capable of modulating from 2 bar to 65 bar with accuracy of 0.25% FS. (higher pressure range can be customised upon request)

QKL electronic pressure regulator can directly replace:
Proportion Air ( QB3H, QBS, GX, QBX, QPV, QB2 ), Festo ( VPPM, VPPL, VPPE, VEAA, VEAB, VEMD ), SMC (ITV1000, ITV2000, ITV3000), Clippard (Cordis), and ASCO (Sentronic)

We hope you have enjoyed reading the article. Please remember to visit our product page.