Pneumatic Solenoid Valves Manufacturer - Kao Lu
> Products > Medical Biotechnology valve (Medical) > Pressure Sensor, Type IPS
Product Feature
•minimal dead space
•temperature-compensated elavation electronics
•materials and constructional design especially optimised for food applications
•other tube connections
Product Specification
GENERAL
Constructional design Ceramic pressure measuring cell
Product name Inline pressure sensor
Product type IPS-958P3-...
Nominal diameter DN 2.5 up to DN 6
Connection ELSA plug fittings for pipe/tube OD 4 to OD 8
Ambient temperature 0°C to + 60°C
Medium temperature 0°C to + 140°C
Medium viscosity up to approx. 35 mm²/s
Body material PPSU (KTW- approved, NSF- certified)
Measuring cell material Al₂O₃
O-ring material FKM (FDA-compliant) or EPDM (NSF-, KTW-approved)
Mounting method by spring clip, internal widthØ 18-22 mm (not included in scope of supply)
Mounting position Preferably upright
Approval NSF/ANSI 169

 

PNEUMATIC - HYDRAULIC
Nominal pressure up to PN 16 in accordance with the specifi cation table
Pressure range 0 bar up to allowable operating pressure OP in accordance with the specifi cation table
Flow rate Kv-value in accordance with the specifi cation table
Medium Gases or liquids which do not corrode the materials specifi ed

 

ELECTRIC
Supply voltage 5 VDC
Voltage tolerance ± 10%
Output voltage 0.5-4.5 VDC (ratiometric)
Electrical Connection 0.75 m 3-pole screened cable (LiYCY 3xAWG26), strand ends pre-tinned.
Protection class IP65

 

ACCURACY
Total error ± 1.5 %FS
Temperature error zero point
< ± 0.02 % FS/K
Temperature margin of error -0.012 % FS/K
Response time < 2 ms