电磁阀,气压缸,气动元件-高鹿兴业有限公司
产品叙述

LOW FLOW, LOW PRESSURE

REQUIRES NO LUBRICATION

REMOTE CONTROL CAPABILITIES

OIL-FREE HIGH PRESSURE SECTION

NOMINAL PRESSURES UP TO 7,500-PSI

AIR OPERATED � DOES NOT REQUIRE ELECTRICITY

The GB series is the most economical of the SC Hydraulic Gas Boosters and is ideal for applications not requiring much volume such as pressure testing small vessels or components. Pressures can be boosted from as low as 50 psig and up to over 11,000 psig.

产品特性
  • LASER CUTTING
  • LEAK DETECTION
  • PRESSURE TESTING VESSELS
  • LOW PRESSURE GAS RECOVERY
  • CHARGING OF NITROGEN BOTTLES
  • GAS ASSISTED INJECTION MOLDING
  • AIRCRAFT SLIDE CHUTE GAS STORAGE
  • CHARGING OF NITROGEN ACCUMULATORS
  • TRANSFER OF SF6 FOR ARC SUPPRESSION
  • TRANSFER OF SF6 FOR CIRCUIT BREAKER INSULATION
  • BOOSTING PRESSURE FROM NITROGEN GENERATORS
产品规格
 
Model No.
Maximum Material
Rated Gas Supply
Pressure (Ps)
Maximum Material
Rated Gas Outlet
Pressure (Po)
A Inlet Port
B Outlet Port
 
 
 
Static Outlet
Stall Pressure
 
Minimum Inlet
Gas Pressure (Ps)
 
Displacement
Per Stroke
(in3 per cycle)
 
GB-15
2,250 psig
2,250 psig
1/4" NPT 
15 Pa
50 psig (3.5 bar)
7.05
155 bar
155 bar
1/4" NPT 
GB-30
4,500 psig
4,500 psig
1/4" NPT 
30 Pa
100 psig (7 bar)
3.1
310 bar
310 bar
1/4" NPT
GB-75
6,000 psig
11,250 psig
9/16"-18(1) 
75 Pa
250 psig (17 bar)
1.2
410 bar
775 bar
9/16"-18(1)

 

(1) Coned and threaded high pressure connection for 1/4" O.D. tubing.

Refer to corresponding gas booster performance curve for operating pressures. Maximum material rated outlet pressures can be reached under special operating conditions. Do not use air drive and/or gas supply pressures that equate to higher outlet pressures than those "maximum material rated outlet pressures" shown on table. Refer to Static Outlet Stall Pressure formula shown on table (for example, for gas booster model GBD-30 the formula is: Static Outlet Stall Pressure = 30*Pa+Ps). Maximum recommended air drive operating pressure: 100-psi. Maximum rated air drive pressure: 150-psi (only for static outlet stall pressure).