Pneumatic Solenoid Valves Manufacturer - Kao Lu
> Products > Proportional Valve > Pressure proportional > Pressure Proportional Valve
Product Serial:QKL-B1T.B2T/QKL-B3-1.B3-2
Product Description

This series is a complete closed loop servo system consisting of two solenoid valves, internal pressure transducer, and electronic controls. Based on analog signal, the pressure is controlled by two solenoid valves to maintain precise pressure; one valve functions as inlet control, the other as exhaust. The pressure output is measured by an internal pressure transducer of B1S or B3H-1 series and provides a feedback signal to the electronic controls. As for B2S or B3H-2, there is an extra piece of external pressure transducer for feedback to maintain higher accuracy.
This series of proportional valve input signal has a selection of 0-5VDC, 0-10VDC or 4-20mA, and also has RS485 ModBus communication output that is used to output the monitor signal required for data acquisition or quality assurance to the panel or controller; and the monitor output has a selection of 0-10V or 4-20mA.

Product Specification
Type B1T、B2T B3-1、B3-2
Input Signal DC 0-5V/ 0-10V / 4-20mA
Output Range 0-120psi (8.2bar)
Supply Pressure Max 1.5 Times Output Pressure
Monitor Output 4-20mA / 0-10V
Supply DC24V (≦4W)
Response 5~10 ms (nominal)
Medium Clear Gas (40 micron filter)
Repeatability ±0.8% F.S.
Hysteresis ±0.8% F.S.
Linearity ±0.8% F.S.
Accuracy ±0.8% F.S.
Flow Rate 39 L/min@ 7bar 2000 L/min@ 7bar
Temp. Range(Operating) 0-80℃
Port Size G1/8" G3/8"
Electrical Connection M12 Connector
Life Cycle Over 1 Billion Times